NSN 5305-00-441-9802
High Torque Screw
Between 0.634 inches and 0.654 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106582-5 for national stock number 5305004419802.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-441-9802.
-
MPN or Model
106582-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.437 inches and 0.477 inches -
Fastener Length
Between 0.634 inches and 0.654 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4130 or steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-170-2942 MPN 106712-3-4TClose Tolerance Screw
- 5305-00-732-9194 MPN NAS1189-02P5LSocket Head Cap Screw
- 5305-00-845-3975 MPN 398611Shoulder Screw
- 5305-01-026-5773 MPN NAS118-04P3BSocket Head Cap Screw
- 5305-01-043-7716 MPN 76121-4-4Close Tolerance Screw
- 5305-01-054-2536 MPN BACB30LK3-11Close Tolerance Screw
- 5305-01-111-7263 MPN 106385PT-4-7Close Tolerance Screw
- 5305-01-141-7904 MPN HT4020-3-4YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-441-9802 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106582-5 | Sps Technologies, Llc |
101448-5 | Northrop Grumman Systems Corporation |