NSN 5305-00-443-2555
Bolt Stove
Between 1.113 inches and 1.143 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number NAS1634C13 for national stock number 5305004432555.
Datasheet
-
Product description
Machine Screw NSN 5305-00-443-2555.
-
MPN or Model
NAS1634C13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.113 inches and 1.143 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
Between 248.0 brinell standard and 341.0 brinell standard -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams 5732 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-581-2487 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5940-01-447-2283 MPN NAS1063B-9-14Terminal Board Marker Strip
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-052-6917 MPN MS24629-50Tapping Screw
- 5305-00-058-2073 MPN NAS1352-02-3Socket Head Cap Screw
- 5305-00-082-1988 MPN NAS1351C5-36Socket Head Cap Screw
- 5305-00-100-6586 MPN NAS1221-06-2PMachine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-443-2555 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1634C13 | National Aerospace Standards |
NAS1634E13 | National Aerospace Standards |