NSN 5305-00-443-6759
High Torque Screw
Between 0.426 inches and 0.456 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number NAS1134V2 for national stock number 5305004436759.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-443-6759.
-
MPN or Model
NAS1134V2
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.426 inches and 0.456 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-525-5016 MPN NAS5312E3-6JSix Lobe Recess Scr
- 5975-01-048-2922 MPN MS3367-6-0Electrical Components Tiedown Strap
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-005-0629 MPN NAS1190E04P6NSocket Head Cap Screw
- 5305-00-007-3025 MPN NAS1102E04-6PMachine Screw
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-051-4505 MPN MS51973-31Setscrew
- 5305-00-052-5915 MPN MS35198-59Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-443-6759 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1134V2 | National Aerospace Standards |
110122-4-2 | Sps Technologies, Llc |