NSN 5305-00-445-5299
High Torque Screw
Between 0.756 inches and 0.803 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT195-4-6 for national stock number 5305004455299.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-445-5299.
-
MPN or Model
HT195-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 0.756 inches and 0.803 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-177-5596 MPN CVC241-3-9Machine Screw
- 5305-00-925-0641 MPN VS2681-013Machine Screw
- 5305-01-045-2902 MPN BACB30LU5-23Close Tolerance Screw
- 5305-01-132-0518 MPN HT4049-5-12Close Tolerance Screw
- 5305-01-160-1959 MPN SC2163-4-2Machine Screw
- 5305-01-206-3444 MPN SC2176T-04-05Machine Screw
- 5305-01-243-0758 MPN HT4020-6-21AClose Tolerance Screw
- 5305-01-408-5367 MPN SC5064-3-54Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-445-5299 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT195-4-6 | Hi-shear Corporation |
HT195-4-6 | Lisi Aerospace Canada Corp |
3M263-4-6 | Sps Technologies, Llc |
HT195-4-6 | Alcoa Fastening Systems |
3M263-4-6 | Arconic Global Fasteners & Rings, |
HT195-4-6 | Satair A/s |
3M263-4-6 | Arconic Global Fasteners & Rings, |
3M263-4-6 | Boeing Company, The |
66117H4-6 | Sps Technologies Inc |
HS2623-4Z6 | Huck Intl Inc |
66117H4-6 | Sps Technologies, Llc |
HS2623-4Z6 | Huck International, Inc. |