NSN 5305-00-445-8751
High Torque Screw
Between 0.693 inches and 0.740 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT195-4-5 for national stock number 5305004458751.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-445-8751.
-
MPN or Model
HT195-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 0.693 inches and 0.740 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5320-00-036-7067 MPN HLT171-6AWPin-rivet Collar
- 5305-00-004-5183 MPN NAS1102-06-40Machine Screw
- 5305-00-068-5405 MPN 20098-3F16Socket Head Cap Screw
- 5305-00-177-5759 MPN PSVT CRES.138-32X.750INSocket Head Cap Screw
- 5305-00-782-1267 MPN NAS1221-3-6Machine Screw
- 5305-01-030-1769 MPN 73991H-5-12Close Tolerance Screw
- 5305-01-050-9679 MPN HT4009-4-15Shoulder Screw
- 5305-01-057-0349 MPN 66117H9-22Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-445-8751 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT195-4-5 | Hi-shear Corporation |
HT195-4-5 | Lisi Aerospace Canada Corp |
66117H4-5 | Sps Technologies, Llc |
3M263-4-5 | Grimes Aerospace Company |
3M263-4-5 | Boeing Company, The |
66117H4-5 | Sps Technologies Inc |
HS2623-4Z5 | Huck Intl Inc |
3M263-4-5 | Alcoa Global Fasteners, Inc. |