NSN 5305-00-450-4087
High Torque Screw
Bearing surface of head to be grooved to 0.323 in. Min 0.325 in. Max dia,0.050 in. Min 0.055 in. Max from top of head.
Manufacturer part number HR101V-4-7 for national stock number 5305004504087.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-450-4087.
-
MPN or Model
HR101V-4-7
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.402 inches -
Fastener Length
Between 0.800 inches and 0.830 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.412 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
60.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-304-8859 MPN AIC811-02-8Socket Head Cap Screw
- 5305-00-880-9820 MPN AIC876-3-10Close Tolerance Screw
- 5305-00-889-2990 MPN NAS1101C3H8Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-054-6265 MPN AIC985-4-12Close Tolerance Screw
- 5305-01-329-9955 MPN AIC4414-3-21Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-450-4087 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101V-4-7 | Hi-shear Corporation |
VT1039V4-7 | Alcoa Global Fasteners, Inc. |
CS318642V4-7 | Textron Fastening Systems |
AIC1023V4-7 | Sps Technologies, Llc |
HR101V-4-7 | Lisi Aerospace Canada Corp |
C387V4-7 | Lockheed Martin Corporation |