NSN 5305-00-455-2601
High Torque Screw
Between 1.051 inches and 1.081 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 7S35-4A12 for national stock number 5305004552601.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-455-2601.
-
MPN or Model
7S35-4A12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.051 inches and 1.081 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-400-9402 MPN 265-530123-3Trim Ground Escape Exit Cover
- 1560-00-401-2644 MPN 285-130258-11Airfoil Rib
- 1560-00-525-9687 MPN 159-47155Aircraft Lubricating Oil Tank
- 1560-00-697-9804 MPN 159-33444-3Landing Gear Control Torque Tube
- 1560-00-732-9824 MPN 265-170007-13Aircraft Structural Component Bracket
- 1560-01-164-0426 MPN L5342223-191Special Purpose Thermal Insulation
- 1560-01-167-3724 MPN L4801510-003Aircraft Fluid Manifold
- 4920-01-177-5026 MPN 13B37000-001Hydr Mounting Plate
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-455-2601 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S35-4A12 | Boeing Company, The |
7S35-4A12 | Boeing Company, The |