NSN 5305-00-456-7841
Panel Screw
Between 0.740 inches and 0.760 inches fastener length, flat countersunk undercut head style, between 0.191 inches and 0.225 inches head diameter, head height: 0.049 inches .
Manufacturer part number 32833P1 for national stock number 5305004567841.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-456-7841.
-
MPN or Model
32833P1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.260 inches and 0.280 inches -
Fastener Length
Between 0.740 inches and 0.760 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.191 inches and 0.225 inches -
Head Height
0.049 inches -
First Diameter From Head
0.090 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.460 inches and 0.500 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel or steel -
Material Specification
Qq-s-763, 300 series federal specification 1st material response or 66, 300 series federal standard 1st material response or comp 16-18 or 18-8 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-f-14072, finish e300 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-177-7452 MPN 2595C1019-11Noninductive Wire Wound Fixed Resistor
- 5975-00-197-1416 MPN 31005G2Electrical Equipment Mounting Base
- 5905-00-402-4228 MPN 217063P12Inductive Wire Wound Fixed Resistor
- 5985-00-731-7391 MPN 1291016P1Fixed Attenuator
- 5985-00-823-2028 MPN 1291015P1Fixed Attenuator
- 5940-00-826-5821 MPN 256031P3Stud Terminal
- 5935-00-873-3911 MPN 160094P6Electrical Receptacle Connector
- 5930-00-917-7516 MPN 2330D6807Rotary Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-456-7841 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
32833P1 | Bae Systems Information And |