NSN 5305-00-461-5597
High Torque Screw
Bearing surface of head to be grooved 0.769 in. Min 0.771 in. Max dia,0.155 in. Min,0.160 in. Max from top of head.
Manufacturer part number HR101H10-21 for national stock number 5305004615597.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-461-5597.
-
MPN or Model
HR101H10-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.843 inches and 0.893 inches -
Fastener Length
Between 2.165 inches and 2.195 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.034 inches -
Grip Diameter
Between 0.6235 inches and 0.6245 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.625 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
60.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-105-7222 MPN HT4068-5-8Close Tolerance Screw
- 5305-01-365-0409 MPN BACB30LR6-43Close Tolerance Screw
- 5305-01-477-5610 MPN HT4075D6-17-49Close Tolerance Screw
- 5305-01-612-6086 MPN 120-225C08R06Close Tolerance Screw
- 5305-01-627-4594 MPN JSFB34V4-21Machine Screw
- 5306-00-357-1882 MPN AIC753-3-4Close Tolerance Bolt
- 5306-00-419-3152 MPN SS5011-10-68AClose Tolerance Bolt
- 5306-01-160-7560 MPN BACB30NE4-21Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-461-5597 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101H10-21 | Hi-shear Corporation |
AIC1023H10-21 | Sps Technologies, Llc |
VT1039H10-21 | Alcoa Global Fasteners, Inc. |
CS318642H10-21 | Textron Fastening Systems |
64040H10-21 | Sps Technologies, Llc |
HR101H10-21 | Lisi Aerospace Canada Corp |
VT1039H10-21 | Arconic Global Fasteners & Rings, |
C387H10-21 | Lockheed Martin Corporation |
64040H10-21 | Sps Technologies, Llc |