NSN 5305-00-465-5492
High Torque Screw
Between 1.718 inches and 1.765 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number SFH26-5A22 for national stock number 5305004655492.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-465-5492.
-
MPN or Model
SFH26-5A22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.333 inches and 0.400 inches -
Fastener Length
Between 1.718 inches and 1.765 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Material Specification
Sps-m-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type 1, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-419-6585 MPN CVC241A4-12Machine Screw
- 5305-00-590-7165 MPN 20097L3F8Socket Head Cap Screw
- 5305-00-814-7331 MPN NAS1202-5Close Tolerance Screw
- 5305-01-045-4304 MPN HT4016-4-5YShoulder Screw
- 5305-01-050-0503 MPN ST3M496-3-11Close Tolerance Screw
- 5305-01-096-1240 MPN 73573-3-20CSocket Head Cap Screw
- 5305-01-135-4125 MPN SC2671-4-11Machine Screw
- 5305-01-196-5093 MPN LD111-0044-2515Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-465-5492 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFH26-5A22 | Sps Technologies, Llc |
SFH26-5A22 | Sps Technologies, Llc |
SFH26-5A22 | Sps Technologies, Llc |
SFH26-5A22 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)