NSN 5305-00-470-8185
High Torque Screw
Between 1.464 inches and 1.511 inches fastener length, flat countersunk head style, between 0.492 inches and 0.512 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number C082-4-19 for national stock number 5305004708185.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-470-8185.
-
MPN or Model
C082-4-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.266 inches and 0.333 inches -
Fastener Length
Between 1.464 inches and 1.511 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.492 inches and 0.512 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-441-0162 MPN AIC82-7-68Close Tolerance Screw
- 5305-00-526-1208 MPN BACB30LU3-9Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-880-9828 MPN A0IC876-3-8Close Tolerance Screw
- 5305-01-112-2427 MPN NAS1101E4-28Machine Screw
- 5305-01-157-1984 MPN AIC940-3-5Machine Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-470-8185 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C082-4-19 | Lockheed Martin Corporation |
C082-4-19 | Arconic Global Fasteners & Rings, |
SFT22-4A19 | Sps Technologies, Llc |
AIC82-4-19 | Sps Technologies, Llc |
VS2545T4F19 | Alcoa Global Fasteners, Inc. |
SFT22-4A19 | Sps Technologies, Llc |
C082-4-19 | Lockheed Martin Corporation |
AIC82-4-19 | Sps Technologies, Llc |
SFT22-4A19 | Sps Technologies, Llc |
VS2545T4F19 | Alcoa Global Fasteners, Inc. |
SFT22-4A19 | Sps Technologies, Llc |