NSN 5305-00-471-6646
High Torque Screw
0.640 inches fastener length, flat countersunk head style, between 0.452 inches and 0.510 inches head diameter, grip diameter: between 0.2495 inches and 0.2504 inches .
Manufacturer part number STD2180E40 for national stock number 5305004716646.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-471-6646.
-
MPN or Model
STD2180E40
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.240 inches -
Fastener Length
0.640 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.452 inches and 0.510 inches -
Grip Diameter
Between 0.2495 inches and 0.2504 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.400 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy -
Surface Treatment
Cadmium -
Surface Treatment Specification
Std.2167 cagec k0289 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-008-0820 MPN 5905-99-0135541Film Fixed Resistor
- 5905-00-030-5290 MPN 5905-99-0221068Composition Fixed Resistor
- 1680-00-469-1051 MPN 99-1482159Beam Cross Trip Rod
- 5305-00-467-7573 MPN 99-6041070Close Tolerance Screw
- 5305-00-884-2313 MPN 5305142003264Machine Screw
- 5306-00-243-2987 MPN 99-6043926Eye Bolt
- 5306-00-452-4582 MPN 99-6034532Bolt Special
- 5905-00-005-9543 MPN MF5-430K0HMSP0RMFilm Fixed Resistor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-471-6646 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
STD2180E40 | Bae Systems (operations) Ltd |
STD2180E40 | British Aerospace Military |
99-6038825 | Nato Stock Number Assigned |
STD2180E40 | Bae Systems (operations) Ltd |