NSN 5305-00-475-0673
Bolt Stove
Two slots cut in thd end 90 deg apart 0.065 in. Min 0.067 in. Max w by 0.100 in. Deep.
Manufacturer part number 240-3111662-8 for national stock number 5305004750673.
Datasheet
-
Product description
Machine Screw NSN 5305-00-475-0673.
-
MPN or Model
240-3111662-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.362 inches and 0.440 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 or steel comp 4037 -
Screw Material Specification
Mil-s-6050 military specification 1st material response or ams 6300 assn standard 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-831-6760 MPN 12A0132-1Aircraft Maintenance Fixture
- 4920-00-836-9615 MPN 12A0042-1Interface Device Adapter Assembly
- 6145-00-160-4775 MPN 760-00253-026Electrical Wire
- 1560-00-310-4973 MPN 240-6110264-2Cowl Mount Assembly
- 1560-00-594-5589 MPN 240-3317552-115Aircraft Floor
- 1560-00-594-5591 MPN 240-3317552-59Aircraft Floor
- 4820-00-203-3263 MPN 240-8980300-12Restrictor Check Valve
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-475-0673 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
240-3111662-8 | Bae Systems Information And |
240-3111662-8 | Tracor Flight Systems Inc |
240-3111662-8 | Hughes Missile Systems Co |
240-3111662-8 | General Dynamics Corp |