NSN 5305-00-480-8327
High Torque Screw
Retaining element in shank.
Manufacturer part number AS116-03-12 for national stock number 5305004808327.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-480-8327.
-
MPN or Model
AS116-03-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 1.122 inches and 1.142 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.095 inches and 0.110 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.750 inches and 0.766 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.033 inches first hole and 1.033 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-149-2020 MPN TL12098-103Rotary Latch Assembly
- 5305-01-043-0556 MPN CA2658-4-32Close Tolerance Screw
- 5305-01-219-8883 MPN CA21070-6-6HSSocket Head Cap Screw
- 5305-01-466-6883 MPN CA22000C10-10-18Hexag Captive Screw
- 5305-01-501-7301 MPN CA2290-10-11-13Panel Screw Assembly
- 5940-00-833-5836 MPN NAS1063A2-702Terminal Board Marker Strip
- 5940-00-935-8317 MPN NAS1746-4Conductor Splice
- 1560-01-630-7440 MPN RBC900AKit Aircraft Maintenance
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-480-8327 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS116-03-12 | Avibank Mfg., Inc. |
MS21125B0312 | National Aerospace Standards |
MS21125B0312 | Military Standards |
CA2652-03-12 | Arconic Global Fasteners & Rings, |