NSN 5305-00-480-8988
High Torque Screw
Between 1.328 inches and 1.374 inches fastener length, pan head style, between 0.594 inches and 0.615 inches head diameter, head height: between 0.188 inches and 0.203 inches .
Manufacturer part number 32-15576-3 for national stock number 5305004808988.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-480-8988.
-
MPN or Model
32-15576-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.572 inches -
Fastener Length
Between 1.328 inches and 1.374 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.188 inches and 0.203 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000, cond c military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
P.S.13145 type 2 cl 3 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-077-0860 MPN 53-11025-31Aircraft Access Door
- 1560-00-088-1841 MPN 32-21116-5Aircraft Skin
- 1560-00-128-8114 MPN 32-11416-41Machine Rib
- 1560-00-138-7861 MPN 32-11538-14Aircraft Structural Component Support
- 1560-00-249-8898 MPN 68A230068-2001Vertical Stabilizer Aft Ring
- 1560-00-272-7663 MPN 68A870776-2001Cooling Air Duct
- 5935-00-306-0715 MPN ST5M1303-1Electrical Plug Connector
- 1560-00-361-8002 MPN 68A113053-2013Aircraft Access Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-480-8988 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
32-15576-3 | Boeing Company, The |