NSN 5305-00-480-8994
High Torque Screw
Between 1.390 inches and 1.436 inches fastener length, pan head style, between 0.594 inches and 0.615 inches head diameter, head height: between 0.188 inches and 0.203 inches .
Manufacturer part number 32-15576-7 for national stock number 5305004808994.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-480-8994.
-
MPN or Model
32-15576-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.571 inches -
Fastener Length
Between 1.390 inches and 1.436 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.188 inches and 0.203 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000, cond c military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
P.S.13145 type 2 cl 3 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-003-4405 MPN 32-32070-45Longeron
- 1560-00-014-5785 MPN 32-31138-31Nose Lndg Gear Fitting Assembly
- 1560-00-026-0668 MPN 32-11185-12Airfoil Rib
- 1560-00-029-7413 MPN 25-60071-3Spacer
- 1560-00-075-0922 MPN 32-24012-1Rudder Flap Hinge
- 1560-00-078-4057 MPN 15-35549-17Canopy Bellow Assembly
- 5975-00-088-2765 MPN 53-790102-301Lightn Conduit Assy
- 1560-00-137-1380 MPN 32-84086-34Aircraft Structural Component Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-480-8994 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
32-15576-7 | Boeing Company, The |