NSN 5305-00-482-5367
Panel Screw
0.750 inches fastener length, pan no. 2 head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.072 inches and 0.082 inches .
Manufacturer part number 7511810P2 for national stock number 5305004825367.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-482-5367.
-
MPN or Model
7511810P2
-
Schedule B
7415.33.8550 (Other copper screws (not for wood) bolts and nuts) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.750 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.072 inches and 0.082 inches -
First Diameter From Head
Between 0.090 inches and 0.095 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.500 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Copper alloy -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-053-3314 MPN 7620928P6Electrical Connector Shell
- 5905-00-114-7960 MPN K8627447G1Inductive Wire Wound Fixed Resistor
- 5940-00-171-0839 MPN K-7115928PC1Terminal Board
- 5945-00-201-8592 MPN 11K2143-2PC5Thermal Relay
- 5950-00-236-8174 MPN ML7462638G1Radio Frequency Coil
- 5940-00-258-5080 MPN K7861852-3REV13Lug Terminal
- 5945-00-259-0938 MPN M7472260Electromagnetic Relay
- 5935-00-333-9112 MPN 7418150P1Telephone Jack Cover
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-482-5367 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7511810P2 | General Electric Co |