NSN 5305-00-484-6253
High Torque Screw
Between 1.485 inches and 1.515 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1155V18 for national stock number 5305004846253.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-484-6253.
-
MPN or Model
NAS1155V18
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.485 inches and 1.515 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-939-9126 MPN NAS25Trunnion Tank Strap
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5940-01-606-8690 MPN M81714/3-DA1Sectional Terminal Junction Block
- 5305-00-058-5048 MPN MS24694S112Machine Screw
- 5305-00-104-9455 MPN NAS1189-04T6Socket Head Cap Screw
- 5305-00-151-0011 MPN NASM24693-S302Machine Screw
- 5305-00-170-1606 MPN NAS664V5HTClose Tolerance Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-484-6253 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155V18 | National Aerospace Standards |