NSN 5305-00-485-2350
High Torque Screw
Between 0.739 inches and 0.769 inches fastener length, flat countersunk head style, between 0.387 inches and 0.430 inches head diameter, grip diameter: between 0.2797 inches and 0.2807 inches .
Manufacturer part number BACB30KR4-7 for national stock number 5305004852350.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-485-2350.
-
MPN or Model
BACB30KR4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.739 inches and 0.769 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.387 inches and 0.430 inches -
Grip Diameter
Between 0.2797 inches and 0.2807 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4037 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response or ams 6300 assn standard 6th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-011-0674 MPN 65-5345-11Aircraft Trim Tab
- 1680-00-021-5022 MPN 30-4576-1Actuator Parts Kit
- 1560-00-074-1523 MPN A02P4131-1Fuel Line Retainer
- 1560-00-342-8187 MPN 5-46619-376Aircraft Structural Plate
- 1680-00-349-4674 MPN 3-69497Relief Tank Cap
- 5930-00-454-7312 MPN 10-60552-1Pressure Switch
- 5935-00-540-8759 MPN BACC45AC20-41SElectrical Receptacle Connector
- 1560-00-563-9115 MPN 60-6769Aircraft Structural Plate
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-485-2350 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30KR4-7 | The Boeing Company |