NSN 5305-00-486-2106
High Torque Screw
Between 3.235 inches and 3.265 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1155V46D for national stock number 5305004862106.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-486-2106.
-
MPN or Model
NAS1155V46D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 3.235 inches and 3.265 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.106 inches first hole and 3.156 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5305-00-050-9215 MPN MS24667-52Socket Head Cap Screw
- 5305-00-143-3252 MPN NAS1352C5LN24Socket Head Cap Screw
- 5305-00-143-9315 MPN NAS1352C4LE16Socket Head Cap Screw
- 5305-00-145-1041 MPN MS24693C340Machine Screw
- 5305-00-271-3500 MPN NAS221DD8Machine Screw
- 5305-00-282-3230 MPN NAS222-31Machine Screw
- 5305-00-285-2620 MPN NAS223-27Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-486-2106 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155V46D | National Aerospace Standards |