NSN 5305-00-486-2284
High Torque Screw
Between 1.340 inches and 1.387 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number VS2545T4F17 for national stock number 5305004862284.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-486-2284.
-
MPN or Model
VS2545T4F17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.335 inches -
Fastener Length
Between 1.340 inches and 1.387 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-239-7776 MPN AIC813-4-R38Machine Screw
- 5305-00-390-0586 MPN NAS1101E4-8Machine Screw
- 5305-01-190-2186 MPN AIC940-4-7Machine Screw
- 5305-01-217-2925 MPN BACB30LU4-7XShoulder Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-462-2729 MPN TX1026V4-6AClose Tolerance Screw
- 5305-01-462-2868 MPN TX1026V4-23AClose Tolerance Screw
- 5305-01-477-5960 MPN TX1027V4-7AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-486-2284 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T4F17 | Alcoa Global Fasteners, Inc. |
AIC82-4-17 | Sps Technologies, Llc |
SFT22-4A17 | Sps Technologies, Llc |
SFT22-4A17 | Sps Technologies, Llc |
C082-4-17 | Arconic Global Fasteners & Rings, |
C082-4-17 | Lockheed Martin Corporation |