NSN 5305-00-486-2292
High Torque Screw
Between 2.277 inches and 2.324 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number VS2545T4F32 for national stock number 5305004862292.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-486-2292.
-
MPN or Model
VS2545T4F32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 2.277 inches and 2.324 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-088-9666 MPN AIC813-08-R10Machine Screw
- 5305-00-372-9975 MPN AIC811-08-11Socket Head Cap Screw
- 5305-00-486-2284 MPN AIC82-4-17Close Tolerance Screw
- 5305-01-054-6234 MPN C9535-6-15Close Tolerance Screw
- 5305-01-054-6262 MPN AIC985-3-7PClose Tolerance Screw
- 5305-01-054-6273 MPN AIC985-5-15PClose Tolerance Screw
- 5305-01-054-6287 MPN AIC984-4-10PClose Tolerance Screw
- 5305-01-056-4415 MPN AIC984-3-2Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-486-2292 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T4F32 | Alcoa Global Fasteners, Inc. |
AIC82-4-32 | Sps Technologies, Llc |
SFT22-4A32 | Sps Technologies, Llc |
SFT22-4A32 | Sps Technologies, Llc |
C082-4-32 | Lockheed Martin Corporation |