NSN 5305-00-486-2320
High Torque Screw
Between 0.710 inches and 0.757 inches fastener length, flat countersunk head style, 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number VS2545T5F6 for national stock number 5305004862320.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-486-2320.
-
MPN or Model
VS2545T5F6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.393 inches -
Fastener Length
Between 0.710 inches and 0.757 inches -
Head Style
Flat countersunk -
Head Diameter
0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-510-5288 MPN LS15263V06-5Machine Screw
- 5305-00-767-3272 MPN 51B220-4Close Tolerance Screw
- 5305-00-903-2196 MPN AIC813-06-R19Machine Screw
- 5305-01-108-2524 MPN 3M938-6D8-7Close Tolerance Screw
- 5305-01-158-5371 MPN AIC940-3-9Machine Screw
- 5305-01-329-9956 MPN AIC4414-3-22Machine Screw
- 5305-01-334-1050 MPN 1701-3-9Close Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-486-2320 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T5F6 | Alcoa Global Fasteners, Inc. |
AIC82-5-6 | Sps Technologies, Llc |
SFT22-5A6 | Sps Technologies, Llc |
C082-5-6 | Arconic Global Fasteners & Rings, |
SFT22-5A6 | Sps Technologies, Llc |
C082-5-6 | Lockheed Martin Corporation |