NSN 5305-00-486-6716
High Torque Screw
Between 0.551 inches and 0.581 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154C4D for national stock number 5305004866716.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-486-6716.
-
MPN or Model
NAS1154C4D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.241 inches and 0.291 inches -
Fastener Length
Between 0.551 inches and 0.581 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.106 inches first hole and 0.126 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5935-00-687-1129 MPN NAS715-11AElectrical Receptacle Connector
- 5305-00-059-3669 MPN NAS1635-3-40Machine Screw
- 5305-00-068-5401 MPN NAS1351C00-2Socket Head Cap Screw
- 5305-00-078-0246 MPN MS21090-0840Socket Head Cap Screw
- 5305-00-082-6982 MPN NAS1190-3P5USocket Head Cap Screw
- 5305-00-165-8074 MPN MS51095-420Hexagon Head Cap Screw
- 5305-00-182-9577 MPN NAS1081C04A3LSetscrew
- 5305-00-216-1300 MPN NAS1190E06P7FSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-486-6716 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154C4D | National Aerospace Standards |
NAS1154E4D | National Aerospace Standards |
NAS1154E4D | National Aerospace Standards |
NAS1154C4D | National Aerospace Standards |
NAS1154E4D | National Aerospace Standards |
Stock Check
- NS: 1
- NE: 478