NSN 5305-00-487-4868
High Torque Screw
Between 1.949 inches and 1.979 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153V27 for national stock number 5305004874868.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-487-4868.
-
MPN or Model
NAS1153V27
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.949 inches and 1.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas621, comp 6al-4v assn standard single material response or ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-007-9882 MPN NAS1100E04-18PMachine Screw
- 5305-00-051-4484 MPN MS51973-9Setscrew
- 5305-00-053-1106 MPN MS35199-111Machine Screw
- 5305-00-150-9596 MPN MILS7839Machine Screw
- 5305-00-235-0393 MPN NAS1101E02-6Machine Screw
- 5305-00-282-3615 MPN NAS334PA13Machine Screw
- 5305-00-356-1704 MPN NAS588-16TClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-487-4868 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153V27 | National Aerospace Standards |