NSN 5305-00-487-5009
High Torque Screw
Between 1.032 inches and 1.079 inches fastener length, flat countersunk head style, 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number VS2545T3F13 for national stock number 5305004875009.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-487-5009.
-
MPN or Model
VS2545T3F13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.210 inches and 0.277 inches -
Fastener Length
Between 1.032 inches and 1.079 inches -
Head Style
Flat countersunk -
Head Diameter
0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.192 inches -
Grip Length
0.802 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-946-8481 MPN LS5938-3-6Machine Screw
- 5305-01-054-6281 MPN AIC984-3-8Close Tolerance Screw
- 5305-01-141-7905 MPN HT4020-6-20AXShoulder Screw
- 5305-01-167-0460 MPN AIC984-4-12Close Tolerance Screw
- 5305-01-218-5774 MPN AIC4043-06-12Machine Screw
- 5305-01-298-2442 MPN AIC984-3-8RClose Tolerance Screw
- 5305-01-423-4575 MPN LD111-0044-2517Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-487-5009 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T3F13 | Alcoa Global Fasteners, Inc. |
AIC82-3-13 | Sps Technologies, Llc |
SFT22-3A13 | Sps Technologies, Llc |
SFT22-3A13 | Sps Technologies, Llc |
C082-3-13 | Lockheed Martin Corporation |