NSN 5305-00-487-5088
High Torque Screw
Between 1.527 inches and 1.574 inches fastener length, flat countersunk head style, 0.502 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number VS2545T4F20T for national stock number 5305004875088.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-487-5088.
-
MPN or Model
VS2545T4F20T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 1.527 inches and 1.574 inches -
Head Style
Flat countersunk -
Head Diameter
0.502 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.084 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.403 inches first hole and 1.433 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-101-6016 MPN AIC812-3-7Machine Screw
- 5305-01-148-5916 MPN AIC985-5-6PClose Tolerance Screw
- 5305-01-284-7161 MPN AIC985-5-30Close Tolerance Screw
- 5305-01-345-2442 MPN 3M1155-2Socket Head Cap Screw
- 5305-01-377-1627 MPN 1701-4-3Close Tolerance Screw
- 5305-01-399-6096 MPN 3M927-3L19Close Tolerance Screw
- 5305-01-622-5286 MPN BACS12HN5-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-487-5088 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T4F20T | Alcoa Global Fasteners, Inc. |
AIC793-4-20 | Sps Technologies, Llc |
70302-4-20 | Sps Technologies, Llc |
VS2545T4F20T | Arconic Global Fasteners & Rings, |
C793-4-20 | Lockheed Martin Corporation |