NSN 5305-00-487-5261
High Torque Screw
Between 1.612 inches and 1.642 inches fastener length, flat countersunk head style, between 0.412 inches and 0.439 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC1023V4-20 for national stock number 5305004875261.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-487-5261.
-
MPN or Model
AIC1023V4-20
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.402 inches -
Fastener Length
Between 1.612 inches and 1.642 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.412 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 59.75 degrees and 60.25 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-005-0518 MPN 51B600C06-7BMachine Screw
- 5305-00-357-9765 MPN AIC811-00-4Socket Head Cap Screw
- 5305-01-004-9496 MPN AIC812-08-7Machine Screw
- 5305-01-107-0036 MPN AIC984-6-36Close Tolerance Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-313-9331 MPN AIC551C-06-399Shoulder Screw
- 5305-01-465-2439 MPN TX1027D3-4AClose Tolerance Screw
- 5305-01-478-2836 MPN TX1027V3-17AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-487-5261 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1023V4-20 | Sps Technologies, Llc |
64040V4-20 | Sps Technologies, Llc |
HR101V4-20 | Hi-shear Corporation |
VT1039V4-20 | Alcoa Global Fasteners, Inc. |
CS318642V4-20 | Textron Fastening Systems |
HR101V4-20 | Lisi Aerospace Canada Corp |
C387V4-20 | Lockheed Martin Corporation |
64040V4-20 | Sps Technologies, Llc |