NSN 5305-00-489-7135
High Torque Screw
Annular grooves per thd form mil-s-7742,0.025 type /40 grooves per in./ 0.250 in. Long from base of hd.
Manufacturer part number 12W7552-7 for national stock number 5305004897135.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-489-7135.
-
MPN or Model
12W7552-7
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.701 inches and 0.731 inches -
Fastener Length
Between 1.261 inches and 1.291 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.192 inches -
Grip Length
0.560 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unj
More from these suppliers
- 1560-00-088-2249 MPN 12C418-3Aircraft Structural Component Bracket
- 1680-00-102-0040 MPN 12W6069-11Bell Crank
- 1560-00-344-4598 MPN 12P11324-8Aircraft Fairing
- 1560-00-409-2737 MPN 12Y202-5Cabin Bracket Assembly
- 1560-00-520-3838 MPN 12W9969-11Center Support Hook
- 1560-00-575-9243 MPN 12W8485-33Track Guide
- 1560-00-927-6642 MPN 12M4858-1Aircraft Structural Component Support
- 4820-01-050-6852 MPN C7908-4-4-041Two Way Restrictor Valve
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-489-7135 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12W7552-7 | Lockheed Martin Corporation |