NSN 5305-00-492-0317
High Torque Screw
Relief groove under head 0.040 in. Max lg by 0.151 in. Nom dia.
Manufacturer part number 974229-1 for national stock number 5305004920317.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-492-0317.
-
MPN or Model
974229-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.330 inches -
Fastener Length
Between 1.070 inches and 1.090 inches -
Head Style
Hexagon countersunk -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
0.312 inches -
Grip Diameter
Between 0.1604 inches and 0.1607 inches -
Thread Diameter
0.164 inches -
Grip Length
0.542 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
40.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 58.0 degrees and 60.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-006-6988 MPN 750-151435-214Film Fixed Resistor
- 5950-00-647-6284 MPN 560411Audio Frequency Transformer
- 5950-00-726-7129 MPN 1047939Power Transformer
- 5935-00-729-8682 MPN 1049508-1Electrical Plug Connector
- 4820-01-435-4676 MPN 3167325-9Valve Body
- 5305-00-225-3860 MPN S8151D416C6ESocket Head Cap Screw
- 5305-00-726-1888 MPN 111303Setscrew
- 6105-01-060-2247 MPN 3166536-1Torque Motor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-492-0317 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
974229-1 | Honeywell International Inc. |
974229-1 | Honeywell International Inc. |
974229-1 | Honeywell International Inc. |
974229-1 | Honeywell International Inc. |