NSN 5305-00-492-3069
High Torque Screw
Between 0.834 inches and 0.854 inches fastener length, flat countersunk head style, between 0.501 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106781-4-6 for national stock number 5305004923069.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-492-3069.
-
MPN or Model
106781-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.489 inches -
Fastener Length
Between 0.834 inches and 0.854 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.501 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-199-1595 MPN 54291-3-5PClose Tolerance Screw
- 5305-00-224-2654 MPN 110122NC5-14Close Tolerance Screw
- 5305-00-377-0403 MPN NAS1189-08P16HNSocket Head Cap Screw
- 5305-00-473-0641 MPN 61688-115Socket Head Cap Screw
- 5305-00-781-5672 MPN 106751-3-430CMachine Screw
- 5305-00-964-6752 MPN 489933Socket Head Cap Screw
- 5305-01-025-6961 MPN HT4019-4D14Close Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-492-3069 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106781-4-6 | Sps Technologies, Llc |
106781-4-6 | Sps Technologies, Llc |