NSN 5305-00-494-5678
High Torque Screw
Between 0.939 inches and 0.949 inches fastener length, flat chamfer head style, 0.350 inches head diameter, head height: between 0.050 inches and 0.060 inches .
Manufacturer part number 106580-1 for national stock number 5305004945678.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-494-5678.
-
MPN or Model
106580-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.8 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.475 inches and 0.557 inches -
Fastener Length
Between 0.939 inches and 0.949 inches -
Head Style
Flat chamfer -
Head Diameter
0.350 inches -
Head Height
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.392 inches and 0.402 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
40.0 microinches grip -
Material
Steel comp 4130 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-809-7422 MPN PH399-0632-8PMachine Screw
- 5305-01-071-0866 MPN 9155M23P03Close Tolerance Screw
- 5305-01-106-2356 MPN HT4068-6-25AClose Tolerance Screw
- 5305-01-185-8049 MPN VT1039H8-22Close Tolerance Screw
- 5305-01-197-8273 MPN HT4053-4-3AClose Tolerance Screw
- 5305-01-216-7381 MPN HT4075V4-7-14Close Tolerance Screw
- 5305-01-219-2963 MPN BACB30LU3D13Close Tolerance Screw
- 5305-01-286-7995 MPN HT4086-5-14AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-494-5678 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106580-1 | Sps Technologies, Llc |
HT8136-1 | Arconic Global Fasteners & Rings, |
CM2046-1 | Cessna Aircraft Company |
HT8136-1 | Alcoa Fastening Systems |
HT8136-1 | Alcoa Global Fasteners, Inc. |
106580-1 | Sps Technologies, Llc |
CM2046-1 | Sps Technologies, Llc |
CM2046-1 | Alcoa Global Fasteners, Inc. |
CM2046-1 | Huck Intl Inc |
CM2046-1 | Huck International, Inc. |