NSN 5305-00-494-7324
High Torque Screw
Between 0.989 inches and 1.019 inches fastener length, between 0.449 inches and 0.507 inches head diameter, between 0.2485 inches and 0.2495 inches grip diameter, shank unthreaded hole diameter: 0.066 inches first hole and 0.086 inches first hole.
Manufacturer part number NAS1154-11D for national stock number 5305004947324.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-494-7324.
-
MPN or Model
NAS1154-11D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.989 inches and 1.019 inches -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
End Application
Used on f111 aircraft -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Steel comp 4140 or steel comp 4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Specification Data
80205-nas 1154 professional/industrial association standard
More from these suppliers
- 5940-00-894-2698 MPN NAS705T3Stud Terminal
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5305-00-007-0208 MPN NAS1100E00-5Machine Screw
- 5305-00-007-6172 MPN NAS1100E00-4Machine Screw
- 5305-00-008-5885 MPN NAS1102E06-7PMachine Screw
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
- 5305-00-127-3613 MPN NAS1352C3LL12Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-494-7324 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154-11D | National Aerospace Standards |