NSN 5305-00-494-8512
High Torque Screw
Between 0.650 inches and 0.670 inches fastener length, flat countersunk head style, between 0.492 inches and 0.512 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number C3606-7 for national stock number 5305004948512.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-494-8512.
-
MPN or Model
C3606-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.530 inches -
Fastener Length
Between 0.650 inches and 0.670 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.492 inches and 0.512 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.140 inches and 0.160 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-116-1663 MPN NAS1101-6-16Machine Screw
- 5305-00-505-2819 MPN LS15267V3-23Machine Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-801-7102 MPN 51B221-10HClose Tolerance Screw
- 5305-00-914-9247 MPN NAS1101-04-11Machine Screw
- 5305-01-009-6705 MPN AIC82-4-9Close Tolerance Screw
- 5305-01-054-6287 MPN AIC984-4-10Close Tolerance Screw
- 5305-01-120-9903 MPN NAS1101-06H24Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-494-8512 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C3606-7 | Lockheed Martin Corporation |
C3606-7 | Sps Technologies, Llc |
C3606-7 | Alcoa Global Fasteners, Inc. |
HR112-4-7 | Hi-shear Corporation |
HR112-4-7 | Lisi Aerospace Canada Corp |