NSN 5305-00-498-2819
High Torque Screw
Hexagon socket in thd 0.1270 in. Min,0.1295 in. Max width across flats,0.775 in. Min,0.815 in. Max lg from bearing surface of head.
Manufacturer part number HR112-4-9 for national stock number 5305004982819.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-498-2819.
-
MPN or Model
HR112-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.530 inches -
Fastener Length
Between 0.910 inches and 0.930 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.492 inches and 0.512 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.400 inches and 0.420 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-505-2668 MPN LS15262V3-24Machine Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-00-984-6805 MPN NAS1101C02-5Machine Screw
- 5305-01-130-6555 MPN AIC944-3-10Machine Screw
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-194-3006 MPN AIC9535-7-41Close Tolerance Screw
- 5305-01-234-2565 MPN LD111-0044-2416Close Tolerance Screw
- 5305-01-328-9228 MPN AIC1652-4-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-498-2819 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR112-4-9 | Hi-shear Corporation |
HR112-4-9 | Lisi Aerospace Canada Corp |
C3606-9 | Sps Technologies, Llc |
C3606-9 | Alcoa Global Fasteners, Inc. |
C3606-9 | Lockheed Martin Corporation |