NSN 5305-00-498-9729
High Torque Screw
Between 0.322 inches and 0.352 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number VT1051-3-1 for national stock number 5305004989729.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-498-9729.
-
MPN or Model
VT1051-3-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.300 inches -
Fastener Length
Between 0.322 inches and 0.352 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-005-5919 MPN 51B222-40HClose Tolerance Screw
- 5305-00-182-9337 MPN CVC241A4-8Machine Screw
- 5305-00-505-3406 MPN LS15264V04-11Machine Screw
- 5305-00-522-9628 MPN HT4025L4-10Close Tolerance Screw
- 5305-00-952-0335 MPN SC2000B1032-10Machine Screw
- 5305-01-142-6289 MPN HT4020-4-13AXShoulder Screw
- 5305-01-143-0603 MPN HT4041-3-1-4YShoulder Screw
- 5305-01-148-1956 MPN NAS1189E06P6KHSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-498-9729 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1051-3-1 | Arconic Global Fasteners & Rings, |
VT1051-3-1 | Alcoa Global Fasteners, Inc. |