NSN 5305-00-499-1316
High Torque Screw
Between 3.203 inches and 3.250 inches fastener length, flat countersunk head style, 0.725 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 13219E4121 for national stock number 5305004991316.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-499-1316.
-
MPN or Model
13219E4121
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.755 inches and 0.822 inches -
Fastener Length
Between 3.203 inches and 3.250 inches -
Head Style
Flat countersunk -
Head Diameter
0.725 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Single Shear Strength
18650 pounds per square inch -
Internal Drive Style
Slot -
Thread Diameter
0.500 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-655-1575 MPN 13207E2942FN10Toggle Switch
- 5930-01-100-4106 MPN 13221E9273-1Pressure Switch
- 5305-00-543-2419 MPN 13207E3409FN63Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-499-1316 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
13219E4121 | Cecom Lr Center |