NSN 5305-00-500-6397
High Torque Screw
Between 0.512 inches and 0.542 inches fastener length, pan head style, between 0.360 inches and 0.370 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number HT8180-3-3 for national stock number 5305005006397.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-500-6397.
-
MPN or Model
HT8180-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 0.512 inches and 0.542 inches -
Head Style
Pan -
Head Diameter
Between 0.360 inches and 0.370 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 44.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-450-5973 MPN C387V4-14Close Tolerance Screw
- 5305-01-014-4256 MPN S5008-3-4Close Tolerance Screw
- 5305-01-110-9772 MPN 3M925C5-10AClose Tolerance Screw
- 5305-01-211-1476 MPN HT4057-3-10AClose Tolerance Screw
- 5305-01-381-0914 MPN VT1696-6-31Close Tolerance Screw
- 5305-01-417-2492 MPN TX1026V3-6AClose Tolerance Screw
- 5305-01-435-3019 MPN BACB30LU6-19Close Tolerance Screw
- 5305-01-487-6877 MPN ST3M557-3-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-500-6397 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8180-3-3 | Arconic Global Fasteners & Rings, |
HT8180-3-3 | Alcoa Global Fasteners, Inc. |