NSN 5305-00-501-9998
High Torque Screw
Between 2.516 inches and 2.546 inches fastener length, flat countersunk head style, between 0.355 inches and 0.397 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15237-4-35D for national stock number 5305005019998.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-501-9998.
-
MPN or Model
LS15237-4-35D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 2.516 inches and 2.546 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.390 inches first hole and 2.440 inches first hole -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-132-9801 MPN HT4054-4D15AClose Tolerance Screw
- 5305-01-241-2653 MPN 3M925C4-18AClose Tolerance Screw
- 5305-01-329-7669 MPN SC3102-3-10AClose Tolerance Screw
- 5305-01-526-4037 MPN TX1026V6-16AClose Tolerance Screw
- 5306-01-142-9892 MPN ST3M497-4D61Shoulder Bolt
- 5320-01-144-6297 MPN HLT251DL-12-15Pin-rivet
- 5320-01-327-9130 MPN HLT451-5-6Pin-rivet
- 5320-01-354-7754 MPN HL1013-5-5Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-501-9998 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-4-35D | Lockheed Martin Corporation |
LS15237-4-35D | Huck International, Inc. |
LS15237-4-35D | Sps Technologies, Llc |
LS15237-4-35D | Hi-shear Corporation |
LS15237-4-35D | Alcoa Global Fasteners, Inc. |
LS15237-4-35D | Lisi Aerospace Canada Corp |
LS15237-4-35D | Sps Technologies Inc |