NSN 5305-00-503-5582
High Torque Screw
Between 0.886 inches and 0.916 inches fastener length, flat countersunk head style, between 0.221 inches and 0.279 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS1151E10 for national stock number 5305005035582.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-503-5582.
-
MPN or Model
NAS1151E10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.221 inches and 0.279 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
30 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1151 professional/industrial association standard
More from these suppliers
- 5940-01-455-2460 MPN NAS1063A10-105BDTerminal Board Marker Strip
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 1680-01-517-0717 MPN NAS1338A5C15DAircr Swing Arm Pin
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-007-9881 MPN NAS1100C04-7PMachine Screw
- 5305-00-021-4124 MPN MS35308-370Hexagon Head Cap Screw
- 5305-00-052-5935 MPN MS35198-77Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-503-5582 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1151E10 | National Aerospace Standards |
Stock Check
- NE: 1141
- NS: 276