NSN 5305-00-503-5696
High Torque Screw
Between 1.390 inches and 1.420 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15237-3-17 for national stock number 5305005035696.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-503-5696.
-
MPN or Model
LS15237-3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 1.390 inches and 1.420 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-006-7378 MPN 183-018-3Auto Pi Test Branch
- 1560-00-009-5943 MPN 4F22441-107ARotating Shaft Eye Bracket
- 1560-00-018-5161 MPN 779274-23Fuel Tube Assembly
- 1560-00-027-9647 MPN 3C24982-109S Actuator Quadrant
- 1560-00-029-4856 MPN 782122-3Forw Panel Assembly
- 5950-00-058-2634 MPN 3B90087-103Power Transformer
- 1560-00-070-5065 MPN 3C24867-108Spoiler Quadrant Assembly
- 1560-00-088-6812 MPN 4F52067-105ARamp Extension Beam
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-503-5696 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-3-17 | Lockheed Martin Corporation |
LS15234C4-3 | Securesearch Inc. Div Research |
LS15237-3-17 | Lockheed Martin Corporation |