NSN 5305-00-503-5734
High Torque Screw
Between 0.922 inches and 0.952 inches fastener length, pan head style, between 0.594 inches and 0.615 inches head diameter, head height: between 0.203 inches and 0.218 inches .
Manufacturer part number LS15234-5-9 for national stock number 5305005035734.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-503-5734.
-
MPN or Model
LS15234-5-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 0.922 inches and 0.952 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.203 inches and 0.218 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-009-0798 MPN 4F50303-138AAircraft Floor
- 1560-00-012-7891 MPN 3A30077-101Refri Seal Retainer
- 1560-00-030-1527 MPN 783766-3Aft C Weld Assembly
- 1560-00-047-5634 MPN 437786Lockpin Assembly
- 1560-00-050-1019 MPN 3W24920-114Aircraft Trailing Edge
- 1560-00-092-4114 MPN 209197-5Aircraft Structural Component Support
- 1680-00-092-4229 MPN 338903-7Cabin Entra Curtain
- 1560-00-120-0016 MPN 4W13063-103AWing Frame Cap
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-503-5734 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234-5-9 | Lockheed Martin Corporation |
LS15234-5-9 | Lockheed Martin Corporation |