NSN 5305-00-503-5736
High Torque Screw
Between 0.676 inches and 0.706 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number LS15234-4-6 for national stock number 5305005035736.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-503-5736.
-
MPN or Model
LS15234-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.676 inches and 0.706 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-027-1367 MPN 766891-33Insulation Blanket
- 1560-00-035-2191 MPN 346056Aileron Autopilot Quadrant
- 1560-00-047-5623 MPN 437623Panel
- 4920-00-092-8084 MPN 4S60151-101AVibration Transducer Simulator
- 1560-00-097-6169 MPN 397819-1Exhaust Muffler
- 1560-00-097-9379 MPN 4J11029-152AAircraft Leading Edge
- 1560-00-110-2893 MPN 4F11890-102AWindshield Cam Lever
- 1560-00-120-0207 MPN 4W12035-233AFairing Rib Cap
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-503-5736 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234-4-6 | Lockheed Martin Corporation |
LS15234-4-6 | Lockheed Martin Corporation |