NSN 5305-00-505-2698
High Torque Screw
Between 0.613 inches and 0.643 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LS15266V4-5 for national stock number 5305005052698.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-2698.
-
MPN or Model
LS15266V4-5
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.613 inches and 0.643 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-006-5087 MPN 695813-1Check Valve
- 1560-00-015-4904 MPN 3W23323-101Flap Panel Assembly
- 1560-00-022-0273 MPN 765837-1Bracket Assembly
- 1560-00-047-5559 MPN 435720LAircraft Structural Component Support
- 1560-00-075-8912 MPN 4F11101-102AAircraft Windshield Panel
- 1560-00-076-1190 MPN 3K14048-101Absorber Aft Panel Assembly
- 1560-00-088-0686 MPN 4T31326-101AShroud Panel Assembly
- 1560-00-088-0750 MPN 4J41453-101AVortex Generator Vane
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-2698 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15266V4-5 | Lockheed Martin Corporation |
LS15266V4-5 | Lockheed Martin Corporation |