NSN 5305-00-505-2733
High Torque Screw
Between 0.813 inches and 0.843 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, locking feature: strip threads.
Manufacturer part number NAS1166-4L for national stock number 5305005052733.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-2733.
-
MPN or Model
NAS1166-4L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 0.813 inches and 0.843 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Locking Feature
Strip threads -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1166 professional/industrial association standard
More from these suppliers
- 4920-00-305-0637 MPN PWA24977Interface Device Adapter Assembly
- 4920-00-471-9560 MPN PWA24038Aircraft Maintenance Fixture
- 4920-00-870-9842 MPN PWA50649Shaft Bearing Plate
- 4820-01-013-9713 MPN T150045-5Angle Valve
- 4920-01-020-8584 MPN PWA53455Interface Device Adapter Assembly
- 4920-01-080-6554 MPN PWA55179Aircraft Engine Maintenance Machining Fixture
- 4920-01-115-2703 MPN PWA52411-18Eye Lifting
- 4920-01-154-3377 MPN PWA55779Aircraft Engine Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-2733 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1166-4L | National Aerospace Standards |
AN515-8-2 | United Technologies Corporation |
NAS1166-4L | National Aerospace Standards |
NAS1166-4L | National Aerospace Standards |
AN515-8-2 | United Technologies Corporation |