NSN 5305-00-505-2790
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number LS15266V08-2 for national stock number 5305005052790.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-2790.
-
MPN or Model
LS15266V08-2
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-01-141-7905 MPN ST3M653C6-20AShoulder Screw
- 5305-01-413-7374 MPN VCL0009-4-29Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5306-01-043-1877 MPN STSBG003A5U059Close Tolerance Bolt
- 5306-01-045-9541 MPN VAL23608-4-7Shoulder Bolt
- 5306-01-049-2991 MPN BACB30NE3-33Shear Bolt
- 5306-01-206-5179 MPN VFK600-6H17Shear Bolt
- 5306-01-240-0856 MPN VAL23033-5H20Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-2790 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15266V08-2 | Lockheed Martin Corporation |
LS15266V08-2 | Valley-todeco, Inc. |
LS15266V08-2 | Arconic Global Fasteners & Rings, |
LS15266V08-2 | Huck International, Inc. |
LS15266V08-2 | Sps Technologies, Llc |
LS15266V08-2 | Alcoa Global Fasteners, Inc. |
LS15266V08-2 | Lockheed Martin Corporation |