NSN 5305-00-505-2896
High Torque Screw
Between 0.363 inches and 0.393 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number LS15234C4-10 for national stock number 5305005052896.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-2896.
-
MPN or Model
LS15234C4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.363 inches and 0.393 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-003-0779 MPN 4L90516-101CMadar Subsystem Cassette
- 1560-00-022-9423 MPN 341401RAircraft Structural Plate
- 1560-00-072-7917 MPN 3E22149-101Seat Bracket
- 1680-00-073-0795 MPN 10491-2Seat Arm Rest
- 1680-00-074-0477 MPN 3E32302-105Stowage Compartment
- 1560-00-097-9286 MPN 4C27154-107ABracket Support
- 1560-00-102-4914 MPN 4F55672-106ALogistic Rail
- 1560-00-124-3526 MPN 4F73243-101AClevis And Bearing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-2896 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234C4-10 | Lockheed Martin Corporation |
LS15234C4-1 | Lockheed Martin Corporation |