NSN 5305-00-505-2931
High Torque Screw
Between 1.261 inches and 1.291 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15234C3-16 for national stock number 5305005052931.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-2931.
-
MPN or Model
LS15234C3-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.261 inches and 1.291 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-015-4751 MPN 3C24811-101Aircraft Structural Component Support
- 1560-00-015-4789 MPN 3F20222-120Aircraft Access Cover
- 1560-00-027-1442 MPN 779593-1Inte Cover Assembly
- 1560-00-080-1305 MPN 4J33189-101AFlap Pin Adjuster
- 4920-00-103-3145 MPN 4S90598-101AAircraft Maintenance Alignment Jig
- 1560-00-119-2393 MPN 4J12229-101HAircraft Structural Component Bracket
- 4920-00-140-5094 MPN 3S51174-101Aircraft Cable Assy
- 1560-00-164-9597 MPN 4E20069-103BDoor Trim Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-2931 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234C3-16 | Lockheed Martin Corporation |