NSN 5305-00-505-2995
High Torque Screw
Between 1.699 inches and 1.729 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15234C3-23 for national stock number 5305005052995.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-2995.
-
MPN or Model
LS15234C3-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.699 inches and 1.729 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-014-4298 MPN 766649-11Nose Tube Assembly
- 1560-00-020-7663 MPN 389195-1Edge Lighted Panel
- 1680-00-022-8065 MPN 795449-105Aircraft Ejection Seat
- 1560-00-022-9448 MPN 348628-5ROuter Wi Stiffener
- 1560-00-029-4864 MPN 782206-15Aft Cockpit T Panel
- 1560-00-044-7026 MPN 4P94304-179ASpecial Purpose Thermal Insulation
- 1680-00-081-0196 MPN 4C52997-101BReaction Cylinder Assembly
- 1560-00-088-6829 MPN 4J33124-101AFlap Track Liner
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-2995 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234C3-23 | Lockheed Martin Corporation |
LS15234C3-23 | Lockheed Martin Corporation |