NSN 5305-00-505-3100
High Torque Screw
Between 3.386 inches and 3.416 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15265V3-50 for national stock number 5305005053100.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-505-3100.
-
MPN or Model
LS15265V3-50
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 3.386 inches and 3.416 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 3.115 inches and 3.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-001-6891 MPN 4J31121-102AAircraft Structural Panel
- 1560-00-015-2451 MPN 3W10034-101Aircraft Fairing
- 1560-00-019-2712 MPN 3T53003-101Elevat Strip Weight
- 1560-00-021-9928 MPN 786344-103Fuselage Tube Assy
- 1560-00-030-1509 MPN 782997-1Survival Ki Bracket
- 1560-00-070-9708 MPN 931953-101Torque Tube Sleeve
- 1560-00-075-8928 MPN 3T60080-103Bullet Fairing Assembly
- 1560-00-077-0952 MPN 776515-2Aircraft Fluid Manifold
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-505-3100 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265V3-50 | Lockheed Martin Corporation |
LS15265V3-50 | Lockheed Martin Corporation |